The GRP skin
Glass-reinforced plastic, moulded with a woodgrain or smooth texture and coloured through the surface rather than painted on. It's what makes composite doors dent-resistant and colour-stable — a scuff doesn't reveal a different colour underneath.
Skin thickness varies between manufacturers and is a genuine quality differentiator, though it's rarely quoted.
The core
Either a solid timber laminate or a foam fill. Solid cores are heavier, feel more substantial when you knock on them, and resist bowing on hot south-facing elevations. Foam cores are lighter and cheaper and are more prone to movement in heat.
The weight of a door is a decent proxy for the core. A door you can lift comfortably with one hand is telling you something.
Reinforcement and edge banding
Internal reinforcement carries the lock case and hinge fixings, so screws pull into something structural rather than into foam.
Edge banding wraps the perimeter of the slab. This is where cheap doors most often fail: a poorly-bonded edge lets moisture into the core, which is the mechanism behind long-term delamination.
Frame, threshold and hardware
The slab sits in a reinforced frame — usually PVCu with internal steel or aluminium. The threshold is either a standard rebated type or a low-level version for step-free access, which needs the right drainage detail to avoid water tracking inwards.
Multi-point locking, hinges, cylinder and handles are the parts you touch daily, and the parts most worth specifying properly.
- GRP skin — colour stability and impact resistance
- Core — weight, thermal performance, resistance to bowing
- Reinforcement — what the locks and hinges actually fix into
- Edge banding — the moisture barrier, and the usual failure point
- Frame — where security is won or lost
- Threshold — access, and where leaks start if detailed badly
Why the layers matter
The outer skin gives the door its finish and weather resistance. The core provides insulation and the solid feel. Reinforcement inside the slab gives hinges, handles and the multi-point lock something solid to fix into, which is what makes a PAS 24 rating possible.
Edge banding seals the core from moisture. If the edges are poorly sealed, water can reach the core over time, which is why the quality of this layer is worth asking about.
What to ask when comparing doors
Useful questions when comparing composite doors:
- Is the core solid, and how thick is the slab?
- Is the doorset PAS 24 tested as a complete unit?
- What cylinder is fitted as standard?
Ask to see the door in section
We bring a cut-through sample to survey so you can see the core, the reinforcement and the edge banding for yourself.