Materials & specs 8 min read

    Decoding the glass spec on your window quote

    Glazing quotes are full of terms that sound technical and are actually simple. Once you can read the four variables below, you can compare any two glass specs in about a minute.

    The short answer

    A modern sealed unit is defined by four things: the Low-E coating, the gas fill, the spacer bar and the glass type in each pane. Those four choices decide the U-value, the noise reduction and the safety rating.

    Low-E coating

    A microscopically thin metallic coating on one internal face of the unit. It lets short-wave solar energy in and reflects long-wave heat back into the room. It's the single biggest contributor to a modern unit's thermal performance and it's invisible in use.

    Softcoat Low-E performs better thermally than the older hardcoat type. Any A-rated unit will have it.

    Gas fill

    The cavity between the panes is filled with argon rather than air. Argon is denser and conducts less heat. It's standard, not an upgrade, and any quote that doesn't mention the fill is worth querying.

    Spacer bar

    The perimeter bar holding the panes apart. Traditional aluminium spacers conduct heat and are the classic cause of condensation forming around the edges of the glass. A warm-edge composite spacer dramatically reduces that cold bridge.

    If you have edge condensation on existing units, an aluminium spacer is usually part of the reason.

    Glass type in each pane

    Float is standard. Toughened is heat-treated so it shatters into blunt granules and is required in critical locations. Laminated has a plastic interlayer that holds the glass together when broken, which is both a security and an acoustic upgrade. Obscure is patterned for privacy.

    Spec lineWhat it meansWorth paying for when
    Softcoat Low-EHeat-reflective coatingAlways — it's the baseline
    Argon filledDenser cavity gasAlways — should be standard
    Warm-edge spacerLow-conductivity perimeter barAlways, especially if you get edge condensation
    ToughenedSafety glass, shatters into granulesRequired low-level and beside doors
    LaminatedInterlayer holds glass togetherGround floor, accessible windows, noise
    ObscurePatterned for privacyBathrooms, overlooked windows

    Reading the U-value

    U-value measures heat loss: lower is better. It can be quoted for the glass alone or for the whole window including the frame — the whole-window figure is the meaningful one and it's always the higher number.

    If two quotes show different U-values, check they're measuring the same thing before concluding one product is better.

    Ask us to spell out your glass spec

    We'll write the coating, fill, spacer and glass type on the quote so you can compare it against anyone else's.

    Materials & specs — common questions

    Get a Free Written Quote

    Tell us what you need and our Leicester team will provide a clear, no-pressure quote.

    ✓ 40+ years local ✓ 10-year insurance-backed guarantee ✓ Free no-pressure survey