How each one opens
A casement is hinged at the side or top and swings outwards, like a door. A tilt and turn does two things from one handle: tilt the top inwards for secure background ventilation, or turn the whole sash inwards to open it fully.
| Casement | Tilt & turn | |
|---|---|---|
| Cost | Lower | Typically 20–35% more |
| Cleaning outside glass | From outside, or a wide-open hinge | From inside the room |
| Trickle ventilation | Handle on first latch | Tilt position — secure and rain-resistant |
| Upstairs safety | Restrictors available | Tilt is inherently restricted |
| Escape route | Fully-reversible or egress hinge needed | Full inward opening |
| Inward clearance | None needed | Sash swings into the room |
Where tilt and turn is worth the premium
Any window you cannot safely reach from outside — a first- or second-floor window above a conservatory roof, a flat, or a gable. Cleaning from inside removes an annual ladder job.
Rooms with young children, because the tilt position gives real ventilation with an opening that a child can't get through.
Wet, windy elevations, because tilt vents from the top and rain doesn't drive straight in.
Where casement is still the right answer
Ground-floor rooms with easy external access. Any room where furniture sits under the window and an inward-opening sash would foul a shelf, blind or curtain.
Traditional street elevations, where a flush casement matches the character of the property in a way a tilt and turn doesn't.
Deciding room by room
A quick way to settle it is to walk round the house and ask the same questions of each opening:
- Is there a radiator, deep sill or sofa right in front of the window? Casement.
- Is it an upstairs window that is hard to clean from outside? Tilt and turn.
- Is it a bedroom that needs an escape opening? Either can work; tilt and turn gives the wider clear gap.
- Does it face a busy road where you want airflow with the window barely open? Tilt and turn.
Does the cost difference matter?
Tilt and turn hardware is more complex, so each window usually costs more than a casement of the same size. On a full house the gap adds up, which is why many owners mix the two in matching frames: tilt and turn where the benefits are real, casements elsewhere. We provide an initial quote comparing both options before measuring. The free measured survey then confirms the specifications, design and requirements before we send the final quotation for your approval.
Get both priced on the same openings
We'll quote casement and tilt and turn side by side so you can see the real difference on your house, not a generic percentage.